SKF RecondOil is a technology and service for regenerating industrial oil. At its core is Double Separation Technology (DST), which removes contamination from the oil down to the nano level so the same oil can be reused repeatedly instead of being replaced.
The Type 2 central automatic grease lubrication system offered by Euroquip is a progressive installation. From a centrally located multi-line pump, the various lubrication groups are each progressively lubricated individually. Progressive The lubricant passes through each pump outlet and main line to the main distributor, which dispenses the lubricant precisely metered to a secondary distributor
Electronic control of the pump with 2, 4 or 8-liter reservoir is by a built-in timer at 12 or 24 volts DC. Using this timer, the time interval between moments of lubrication can be set and adjusted afterwards. This regulation is done according to the intensity of use and the aggressiveness of the products to
In the progressive Euroquip distributor, the lubricant is first measured in the measuring chamber. During the next cycle, the precisely dosed amount of lubricant will be sent to the output. Alarm signal It is important for proper operation that the outlets are supplied with lubricant one by one. An alarm signal is triggered if one
Polyamide piping Flexible polyamide hoses are used for standard vehicles. These are high-pressure hoses with a burst pressure of 600 bar. The reason for using these plastic hoses is that they are subjected to high pressure and the vehicle also vibrates. Advantages over steel pipe A steel pipe, which is put under high pressure, and
Purpose lubrication computer in a grease pump The lubrication computer with specially built-in lubrication micro chip aims to allow setting a working and break time according to the type of vehicle and operating conditions. Location lubrication computer The lubrication computer is built into the bottom of the pump. Functions of the lubrication computer Through this

